Antifreeze

Antifreeze Fosser FA 11 1l concentrate, blue

FOS14011

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (> 10)

Šiauliai (5)

Price: 4.50
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 11 1l concentrate, blue

FOSSER Antifreeze FA 11 is an economical corrosion inhibitor and anti-freeze agent concentrate for radiators in water-cooled vehicles. The product is free of nitrite, amines and phosphates. FOSSER Antifreeze FA 11 provides excellent frost and corrosion protection all year round. The product does not have any negative effect on coolant hoses or cylinder head gaskets.

FOSSER Antifreeze FA 11, mixed with the correct amount of water, is used as a coolant and thermal transfer fluid in internal combustion engines. The product is suitable for engines made in cast iron, aluminium and a combination of these two metals, and for cooling systems made from aluminium or copper alloys. We recommend maintaining a concentration of 50% (v/v) during all seasons.

Observe manufacturer instructions!

Recommendations*:

MB 325.2

MAN 324 NF

VW TL 774 C

MTU
BMW
Opel-GM
Deutz/MWM
Ford/Jaguar

Mixing table

frost protection	rate of antifreeze	rate of water
-20°C	1 rate	2 rates
-27°C	1 rate	1,5 rates
-36°C	1 rate	1 rate

TYPICAL VALUES	METHOD	UNIT	FOSSER Antifreeze FA 11
Density at 20°C	DIN 51 757	g/cm3	1.120
Reserve alkalinity (pH 5.5)	ASTM D 1121	ml 0,1 n HCL	11
Boiling point	ASTM D 1120	°C	>163
pH	ASTM D 1287	-	7
COC flash point	DIN 51 758	°C	>120
Frost protection at 50% (vol.)	ASTM D 1177	°C	- 36
Colour	-	-	yellow or blue

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 1.12 kg.

Approvals/recommendations: MB 325.2, MAN 324 NF, VW TL 774 C, MTU, BMW, Opel-GM, Deutz/MWM, Ford/Jaguar
Specification: Blue
Measure, l: 1

Antifreeze Fosser FA 11 1l concentrate, yello

FOS140111

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (5)

Šiauliai (5)

Kauno prd (2)

Price: 4.50
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 11 1l concentrate, yello

FOSSER Antifreeze FA 11 is an economical corrosion inhibitor and anti-freeze agent concentrate for radiators in water-cooled vehicles. The product is free of nitrite, amines and phosphates. FOSSER Antifreeze FA 11 provides excellent frost and corrosion protection all year round. The product does not have any negative effect on coolant hoses or cylinder head gaskets.

FOSSER Antifreeze FA 11, mixed with the correct amount of water, is used as a coolant and thermal transfer fluid in internal combustion engines. The product is suitable for engines made in cast iron, aluminium and a combination of these two metals, and for cooling systems made from aluminium or copper alloys. We recommend maintaining a concentration of 50% (v/v) during all seasons.

Observe manufacturer instructions!

Recommendations*:

MB 325.2

MAN 324 NF

VW TL 774 C

MTU
BMW
Opel-GM
Deutz/MWM
Ford/Jaguar

Mixing table

frost protection	rate of antifreeze	rate of water
-20°C	1 rate	2 rates
-27°C	1 rate	1,5 rates
-36°C	1 rate	1 rate

TYPICAL VALUES	METHOD	UNIT	FOSSER Antifreeze FA 11
Density at 20°C	DIN 51 757	g/cm3	1.120
Reserve alkalinity (pH 5.5)	ASTM D 1121	ml 0,1 n HCL	11
Boiling point	ASTM D 1120	°C	>163
pH	ASTM D 1287	-	7
COC flash point	DIN 51 758	°C	>120
Frost protection at 50% (vol.)	ASTM D 1177	°C	- 36
Colour	-	-	yellow or blue

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 1.12 kg.

Specification: Yellow
Approvals/recommendations: MB 325.2, MAN 324 NF, VW TL 774 C, MTU, BMW, Opel-GM, Deutz/MWM, Ford/Jaguar
Measure, l: 1

Antifreeze Fosser FA 11 20l concentrate, yello

FOS140120

Brand: Fosser Germany

Warehouses: Kaunas (2)

Price: 68.60
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 11 200l concentrate, yello

FOS1401200

Brand: Fosser Germany

Warehouses: Kaunas (1)

Price: 698.80
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 11 4l concentrate, blue

FOS14014

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (> 10)

Kauno prd (2)

Price: 16.00
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 11 4l concentrate, blue

FOSSER Antifreeze FA 11 is an economical corrosion inhibitor and anti-freeze agent concentrate for radiators in water-cooled vehicles. The product is free of nitrite, amines and phosphates. FOSSER Antifreeze FA 11 provides excellent frost and corrosion protection all year round. The product does not have any negative effect on coolant hoses or cylinder head gaskets.

FOSSER Antifreeze FA 11, mixed with the correct amount of water, is used as a coolant and thermal transfer fluid in internal combustion engines. The product is suitable for engines made in cast iron, aluminium and a combination of these two metals, and for cooling systems made from aluminium or copper alloys. We recommend maintaining a concentration of 50% (v/v) during all seasons.

Observe manufacturer instructions!

Recommendations*:

MB 325.2

MAN 324 NF

VW TL 774 C

MTU
BMW
Opel-GM
Deutz/MWM
Ford/Jaguar

Mixing table

frost protection	rate of antifreeze	rate of water
-20°C	1 rate	2 rates
-27°C	1 rate	1,5 rates
-36°C	1 rate	1 rate

TYPICAL VALUES	METHOD	UNIT	FOSSER Antifreeze FA 11
Density at 20°C	DIN 51 757	g/cm3	1.120
Reserve alkalinity (pH 5.5)	ASTM D 1121	ml 0,1 n HCL	11
Boiling point	ASTM D 1120	°C	>163
pH	ASTM D 1287	-	7
COC flash point	DIN 51 758	°C	>120
Frost protection at 50% (vol.)	ASTM D 1177	°C	- 36
Colour	-	-	yellow or blue

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 4.48 kg.

Approvals/recommendations: MB 325.2, MAN 324 NF, VW TL 774 C, MTU, BMW, Opel-GM, Deutz/MWM, Ford/Jaguar
Specification: Blue
Measure, l: 4

Antifreeze Fosser FA 11 4l concentrate, yello

FOS140141

Brand: Fosser Germany

Warehouses: Kaunas (4)

Vilnius Len (7)

Šiauliai (2)

Price: 16.00
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 11 4l concentrate, yello

FOSSER Antifreeze FA 11 is an economical corrosion inhibitor and anti-freeze agent concentrate for radiators in water-cooled vehicles. The product is free of nitrite, amines and phosphates. FOSSER Antifreeze FA 11 provides excellent frost and corrosion protection all year round. The product does not have any negative effect on coolant hoses or cylinder head gaskets.

FOSSER Antifreeze FA 11, mixed with the correct amount of water, is used as a coolant and thermal transfer fluid in internal combustion engines. The product is suitable for engines made in cast iron, aluminium and a combination of these two metals, and for cooling systems made from aluminium or copper alloys. We recommend maintaining a concentration of 50% (v/v) during all seasons.

Observe manufacturer instructions!

Recommendations*:

MB 325.2

MAN 324 NF

VW TL 774 C

MTU
BMW
Opel-GM
Deutz/MWM
Ford/Jaguar

Mixing table

frost protection	rate of antifreeze	rate of water
-20°C	1 rate	2 rates
-27°C	1 rate	1,5 rates
-36°C	1 rate	1 rate

TYPICAL VALUES	METHOD	UNIT	FOSSER Antifreeze FA 11
Density at 20°C	DIN 51 757	g/cm3	1.120
Reserve alkalinity (pH 5.5)	ASTM D 1121	ml 0,1 n HCL	11
Boiling point	ASTM D 1120	°C	>163
pH	ASTM D 1287	-	7
COC flash point	DIN 51 758	°C	>120
Frost protection at 50% (vol.)	ASTM D 1177	°C	- 36
Colour	-	-	yellow or blue

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 4.48 kg.

Approvals/recommendations: MB 325.2, MAN 324 NF, VW TL 774 C, MTU, BMW, Opel-GM, Deutz/MWM, Ford/Jaguar
Specification: Yellow
Measure, l: 4

Antifreeze Fosser FA 11 60l concentrate, yello

FOS1401601

Brand: Fosser Germany

Warehouses: Kaunas (1)

Price: 238.90
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 11 60l concentrate, yello

FOSSER Antifreeze FA 11 is an economical corrosion inhibitor and anti-freeze agent concentrate for radiators in water-cooled vehicles. The product is free of nitrite, amines and phosphates. FOSSER Antifreeze FA 11 provides excellent frost and corrosion protection all year round. The product does not have any negative effect on coolant hoses or cylinder head gaskets.

FOSSER Antifreeze FA 11, mixed with the correct amount of water, is used as a coolant and thermal transfer fluid in internal combustion engines. The product is suitable for engines made in cast iron, aluminium and a combination of these two metals, and for cooling systems made from aluminium or copper alloys. We recommend maintaining a concentration of 50% (v/v) during all seasons.

Observe manufacturer instructions!

Recommendations*:

MB 325.2

MAN 324 NF

VW TL 774 C

MTU
BMW
Opel-GM
Deutz/MWM
Ford/Jaguar

Mixing table

frost protection	rate of antifreeze	rate of water
-20°C	1 rate	2 rates
-27°C	1 rate	1,5 rates
-36°C	1 rate	1 rate

TYPICAL VALUES	METHOD	UNIT	FOSSER Antifreeze FA 11
Density at 20°C	DIN 51 757	g/cm3	1.120
Reserve alkalinity (pH 5.5)	ASTM D 1121	ml 0,1 n HCL	11
Boiling point	ASTM D 1120	°C	>163
pH	ASTM D 1287	-	7
COC flash point	DIN 51 758	°C	>120
Frost protection at 50% (vol.)	ASTM D 1177	°C	- 36
Colour	-	-	yellow or blue

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 67.2 kg.

Approvals/recommendations: MB 325.2, MAN 324 NF, VW TL 774 C, MTU, BMW, Opel-GM, Deutz/MWM, Ford/Jaguar
Measure, l: 60
Specification: Yellow

Antifreeze Fosser FA 12 1l concentrate G12

FOS14021

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (1)

Šiauliai (1)

Kiti sandėliai (2)

Price: 5.60
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 12 1l concentrate G12

FOSSER Antifreeze FA 12 is a radiator frost protection agent based on ethylene glycol. It is free of any potentially hazardous substances such as nitrites, amines and phosphates. Thanks to the optimised combination of highly stable inhibitors made from silicate-free carboxylic acid technology, it provides excellent and lasting protection against corrosion and cavitation. Other additives prevent deposits and foaming of the coolant.FOSSER Antifreeze FA 12 offers maintenance-free year-round frost and corrosion protection during the entire service life of the engine. The product does not have any negative effect on coolant hoses or cylinder head gaskets.

FOSSER Antifreeze FA 12 mixed with the required amount of water can be used without restrictions as a thermal transfer fluid in internal combustion engines made in cast iron, aluminium or a combination of these two metals and radiator systems made in aluminium or copper alloys. FOSSER Antifreeze FA 12 is particularly recommended for light-alloy engines where the aluminium must be protected against the effect of increased temperatures. It can be mixed with most coolants based on ethylene glycol. We recommend maintaining a concentration of 50% (vol.) during all seasons.

Caution: Observe manufacturer instructions.

Recommendations*:

MB 325.3

MAN 324 SNF

VW TL 774 D/F

Mixing table

frost protection	rate of antifreeze	rate of water
-20°C	1 rate	2 rates
-27°C	1 rate	1,5 rates
-36°C	1 rate	1 rate

TYPICAL VALUES	METHOD	UNIT	FOSSER Antifreeze FA 12
Density at 20°C	DIN 51 757	g/cm3	1.125
Reserve alkalinity (pH 5.5)	ASTM D 1121	ml 0,1 n HCI	28
Boiling point	ASTM D 1120	°C	>163
pH	ASTM D 1287	-	8.6
COC flash point	DIN 51 758	°C	>120
Frost protection at 50% (vol.)	ASTM D 1177	°C	- 36
Colour			red

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 1.125 kg.

Measure, l: 1
Approvals/recommendations: MB approval 325.3, MAN 324 SNF, VW TL 774 D/F

Antifreeze Fosser FA 12 20l concentrate G12

FOS140220

Brand: Fosser Germany

Warehouses: Kaunas (5)

Vilnius Len (1)

Šiauliai (1)

Kauno prd (1)

Price: 85.50
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 12 200l concentrate G12

FOS1402200

Brand: Fosser Germany

Warehouses

Price: 690.00
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 12 200l concentrate G12

FOSSER Antifreeze FA 12 is a radiator frost protection agent based on ethylene glycol. It is free of any potentially hazardous substances such as nitrites, amines and phosphates. Thanks to the optimised combination of highly stable inhibitors made from silicate-free carboxylic acid technology, it provides excellent and lasting protection against corrosion and cavitation. Other additives prevent deposits and foaming of the coolant.FOSSER Antifreeze FA 12 offers maintenance-free year-round frost and corrosion protection during the entire service life of the engine. The product does not have any negative effect on coolant hoses or cylinder head gaskets.

FOSSER Antifreeze FA 12 mixed with the required amount of water can be used without restrictions as a thermal transfer fluid in internal combustion engines made in cast iron, aluminium or a combination of these two metals and radiator systems made in aluminium or copper alloys. FOSSER Antifreeze FA 12 is particularly recommended for light-alloy engines where the aluminium must be protected against the effect of increased temperatures. It can be mixed with most coolants based on ethylene glycol. We recommend maintaining a concentration of 50% (vol.) during all seasons.

Caution: Observe manufacturer instructions.

Recommendations*:

MB 325.3

MAN 324 SNF

VW TL 774 D/F

Mixing table

frost protection	rate of antifreeze	rate of water
-20°C	1 rate	2 rates
-27°C	1 rate	1,5 rates
-36°C	1 rate	1 rate

TYPICAL VALUES	METHOD	UNIT	FOSSER Antifreeze FA 12
Density at 20°C	DIN 51 757	g/cm3	1.125
Reserve alkalinity (pH 5.5)	ASTM D 1121	ml 0,1 n HCI	28
Boiling point	ASTM D 1120	°C	>163
pH	ASTM D 1287	-	8.6
COC flash point	DIN 51 758	°C	>120
Frost protection at 50% (vol.)	ASTM D 1177	°C	- 36
Colour			red

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 225 kg.

Measure, l: 200
Approvals/recommendations: MB approval 325.3, MAN 324 SNF, VW TL 774 D/F

Antifreeze Fosser FA 12 4l concentrate G12

FOS14024

Brand: Fosser Germany

Warehouses: Vilnius Len (1)

Price: 21.50
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 12 4l concentrate G12

FOSSER Antifreeze FA 12 is a radiator frost protection agent based on ethylene glycol. It is free of any potentially hazardous substances such as nitrites, amines and phosphates. Thanks to the optimised combination of highly stable inhibitors made from silicate-free carboxylic acid technology, it provides excellent and lasting protection against corrosion and cavitation. Other additives prevent deposits and foaming of the coolant.FOSSER Antifreeze FA 12 offers maintenance-free year-round frost and corrosion protection during the entire service life of the engine. The product does not have any negative effect on coolant hoses or cylinder head gaskets.

FOSSER Antifreeze FA 12 mixed with the required amount of water can be used without restrictions as a thermal transfer fluid in internal combustion engines made in cast iron, aluminium or a combination of these two metals and radiator systems made in aluminium or copper alloys. FOSSER Antifreeze FA 12 is particularly recommended for light-alloy engines where the aluminium must be protected against the effect of increased temperatures. It can be mixed with most coolants based on ethylene glycol. We recommend maintaining a concentration of 50% (vol.) during all seasons.

Caution: Observe manufacturer instructions.

Recommendations*:

MB 325.3

MAN 324 SNF

VW TL 774 D/F

Mixing table

frost protection	rate of antifreeze	rate of water
-20°C	1 rate	2 rates
-27°C	1 rate	1,5 rates
-36°C	1 rate	1 rate

TYPICAL VALUES	METHOD	UNIT	FOSSER Antifreeze FA 12
Density at 20°C	DIN 51 757	g/cm3	1.125
Reserve alkalinity (pH 5.5)	ASTM D 1121	ml 0,1 n HCI	28
Boiling point	ASTM D 1120	°C	>163
pH	ASTM D 1287	-	8.6
COC flash point	DIN 51 758	°C	>120
Frost protection at 50% (vol.)	ASTM D 1177	°C	- 36
Colour			red

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 4.5 kg.

Measure, l: 4
Approvals/recommendations: MB approval 325.3, MAN 324 SNF, VW TL 774 D/F

Antifreeze Fosser FA 12 5l concentrate G12

FOS14025

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (4)

Šiauliai (1)

Kauno prd (2)

Price: 19.00
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 12 60l concentrate G12

FOS140260

Brand: Fosser Germany

Warehouses: Kaunas (1)

Vilnius Len (1)

Price: 252.80
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 12 60l concentrate G12

FOSSER Antifreeze FA 12 is a radiator frost protection agent based on ethylene glycol. It is free of any potentially hazardous substances such as nitrites, amines and phosphates. Thanks to the optimised combination of highly stable inhibitors made from silicate-free carboxylic acid technology, it provides excellent and lasting protection against corrosion and cavitation. Other additives prevent deposits and foaming of the coolant.FOSSER Antifreeze FA 12 offers maintenance-free year-round frost and corrosion protection during the entire service life of the engine. The product does not have any negative effect on coolant hoses or cylinder head gaskets.

FOSSER Antifreeze FA 12 mixed with the required amount of water can be used without restrictions as a thermal transfer fluid in internal combustion engines made in cast iron, aluminium or a combination of these two metals and radiator systems made in aluminium or copper alloys. FOSSER Antifreeze FA 12 is particularly recommended for light-alloy engines where the aluminium must be protected against the effect of increased temperatures. It can be mixed with most coolants based on ethylene glycol. We recommend maintaining a concentration of 50% (vol.) during all seasons.

Caution: Observe manufacturer instructions.

Recommendations*:

MB 325.3

MAN 324 SNF

VW TL 774 D/F

Mixing table

frost protection	rate of antifreeze	rate of water
-20°C	1 rate	2 rates
-27°C	1 rate	1,5 rates
-36°C	1 rate	1 rate

TYPICAL VALUES	METHOD	UNIT	FOSSER Antifreeze FA 12
Density at 20°C	DIN 51 757	g/cm3	1.125
Reserve alkalinity (pH 5.5)	ASTM D 1121	ml 0,1 n HCI	28
Boiling point	ASTM D 1120	°C	>163
pH	ASTM D 1287	-	8.6
COC flash point	DIN 51 758	°C	>120
Frost protection at 50% (vol.)	ASTM D 1177	°C	- 36
Colour			red

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 67.5 kg.

Approvals/recommendations: MB approval 325.3, MAN 324 SNF, VW TL 774 D/F
Measure, l: 60

Antifreeze Fosser FA 12+ 1l concentrate

FOS14031

Brand: Fosser Germany

Warehouses: Vilnius Len (3)

Šiauliai (1)

Price: 6.00
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 12+ 1l concentrate

FOSSER Antifreeze FA 12+ is a radiator frost protection agent based on ethylene glycol. It is free of any potentially hazardous substances such as nitrites, amines and phosphates. Thanks to the optimised combination of highly stable inhibitors made from silicate-free carboxylic acid technology, it provides excellent and lasting protection against corrosion and cavitation. Other additives prevent deposits and foaming of the coolant.FOSSER Antifreeze FA 12+ offers maintenance-free year-round frost and corrosion protection during the entire service life of the engine. The product does not have any negative effect on coolant hoses or cylinder head gaskets.

FOSSER Antifreeze FA 12+ mixed with the required amount of water can be used without restrictions as a thermal transfer fluid in internal combustion engines made in cast iron, aluminium or a combination of these two metals and radiator systems made in aluminium or copper alloys. FOSSER Antifreeze FA 12+ is particularly recommended for light-alloy engines where the aluminium must be protected against the effect of increased temperatures. It can be mixed with most coolants based on ethylene glycol. We recommend maintaining a concentration of 50% (vol.) during all seasons.

Caution: Observe manufacturer instructions.

Recommendations*:

VW TL 774 D/F

Mixing table

frost protection	rate of antifreeze	rate of water
-20°C	1 rate	2 rates
-27°C	1 rate	1,5 rates
-36°C	1 rate	1 rate

TYPICAL VALUES	METHOD	UNIT	FOSSER Antifreeze FA 12+
Density at 20°C	DIN 51 757	g/cm3	1.125
Reserve alkalinity (pH 5.5)	ASTM D 1121	ml 0,1 n HCI	28
Boiling point	ASTM D 1120	°C	>163
pH	ASTM D 1287	-	8.6
COC flash point	DIN 51 758	°C	>120
Frost protection at 50% (vol.)	ASTM D 1177	°C	- 36
Colour			purple

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 1.13 kg.

Measure, l: 1
Approvals/recommendations: VW TL 774 D/F

Antifreeze Fosser FA 12+ 1,5l concentrate

FOS140315

Brand: Fosser Germany

Warehouses: Kaunas (10)

Vilnius Len (2)

Price: 6.50
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 13 1.5l concentrate

FOS14041

Brand: Fosser Germany

Warehouses: Klaipėda (2)

Price: 7.20
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 11 5l -30 C G11

FOS14075

Brand: Fosser Germany

Warehouses: Kaunas (3)

Price: 10.60
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 11 5l -30 °C (G11)

FOS14085

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (9)

Klaipėda (5)

Šiauliai (7)

Price: 10.60
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 11 5l -30 °C (G11)

FOSSER Antifreeze FA 11 is an economical corrosion inhibitor and anti-freeze agent concentrate for radiators in water-cooled vehicles. The product is free of nitrite, amines and phosphates. FOSSER Antifreeze FA 11 provides excellent frost and corrosion protection all year round. The product does not have any negative effect on coolant hoses or cylinder head gaskets.

FOSSER Antifreeze FA 11, mixed with the correct amount of water, is used as a coolant and thermal transfer fluid in internal combustion engines. The product is suitable for engines made in cast iron, aluminium and a combination of these two metals, and for cooling systems made from aluminium or copper alloys. We recommend maintaining a concentration of 50% (v/v) during all seasons.

Observe manufacturer instructions!

Recommendations*:

MB 325.2

MAN 324 NF

VW TL 774 C

MTU
BMW
Opel-GM
Deutz/MWM
Ford/Jaguar

Mixing table

frost protection	rate of antifreeze	rate of water
-20°C	1 rate	2 rates
-27°C	1 rate	1,5 rates
-36°C	1 rate	1 rate

TYPICAL VALUES	METHOD	UNIT	FOSSER Antifreeze FA 11
Density at 20°C	DIN 51 757	g/cm3	1.120
Reserve alkalinity (pH 5.5)	ASTM D 1121	ml 0,1 n HCL	11
Boiling point	ASTM D 1120	°C	>163
pH	ASTM D 1287	-	7
COC flash point	DIN 51 758	°C	>120
Frost protection at 50% (vol.)	ASTM D 1177	°C	- 36
Colour	-	-	yellow or blue

The above values may vary within commercially accepted tolerances

* meets the requirements of the OEM manufacturer

Weight: 5.25 kg.

Approvals/recommendations: MB 325.2, MAN 324 NF, VW TL 774 C, MTU, BMW, Opel-GM, Deutz/MWM, Ford/Jaguar
Measure, l: 5

Antifreeze Fosser FA 12 5l -30 °C (G12)

FOS14095

Brand: Fosser Germany

Warehouses: Kaunas (> 10)

Vilnius Len (6)

Klaipėda (2)

Šiauliai (5)

Kauno prd (5)

Price: 11.30
0

More information
Analogues
OE numbers
Adaption

Antifreeze Fosser FA 12 5l -30 °C (G12)

FOSSER Antifreeze FA 12 is a radiator frost protection agent based on ethylene glycol. It is free of any potentially hazardous substances such as nitrites, amines and phosphates. Thanks to the optimised combination of highly stable inhibitors made from silicate-free carboxylic acid technology, it provides excellent and lasting protection against corrosion and cavitation. Other additives prevent deposits and foaming of the coolant.FOSSER Antifreeze FA 12 offers maintenance-free year-round frost and corrosion protection during the entire service life of the engine. The product does not have any negative effect on coolant hoses or cylinder head gaskets.

FOSSER Antifreeze FA 12 mixed with the required amount of water can be used without restrictions as a thermal transfer fluid in internal combustion engines made in cast iron, aluminium or a combination of these two metals and radiator systems made in aluminium or copper alloys. FOSSER Antifreeze FA 12 is particularly recommended for light-alloy engines where the aluminium must be protected against the effect of increased temperatures. It can be mixed with most coolants based on ethylene glycol. We recommend maintaining a concentration of 50% (vol.) during all seasons.

Caution: Observe manufacturer instructions.

Recommendations*:

MB 325.3

MAN 324 SNF

VW TL 774 D/F

Mixing table

frost protection	rate of antifreeze	rate of water
-20°C	1 rate	2 rates
-27°C	1 rate	1,5 rates
-36°C	1 rate	1 rate

TYPICAL VALUES	METHOD	UNIT	FOSSER Antifreeze FA 12
Density at 20°C	DIN 51 757	g/cm3	1.125
Reserve alkalinity (pH 5.5)	ASTM D 1121	ml 0,1 n HCI	28
Boiling point	ASTM D 1120	°C	>163
pH	ASTM D 1287	-	8.6
COC flash point	DIN 51 758	°C	>120
Frost protection at 50% (vol.)	ASTM D 1177	°C	- 36
Colour			red